Diamond Cutting Discs For Big Slabs
Some of the materials that we can call ceramic large slabs are: Dekton, Lapitec, Neolith, Porcelain Tiles, Laminate, Techlam, Sapienstone and Zenith. The blades for Ceramic big slabs are not simply Diamond discs because these series are devaloped with a Sandwich technology that allows an excellent finishing on every type of materials. The Poker Line Diamond Disc series with sandwich technology offers excellent cutting guarantees on innovative surfaces.
You can learn more about sandwich technology from here.
Grescut Diamond Cutting Disc
Grescut diamond cutting disc is designed for cutting porcelain based large slabs. Due to Sandwich technology, the innovative surface guarantees excellent results and high speed. It is suitable for Neolith, Atlas Concorde, Kerlite, Techlam, Maxfine, Zero3, Ultra, Marvel XL, Porcelain tile cutting.
Ø300 × 2,2 × 10 F = 60/50 -Normal core
Ø360 × 3,0 × 10 F = 60/50 -Normal and silent core
Ø410 × 3,2 × 10 F = 60/50 -Normal and silent core
Dekcut Dekton Diamond Cutting Disc
Dekton is an ultra-compact surface developed by Cosentino, consisting of a mixture of raw materials used to produce glass and porcelain. Dekton countertops are widely preferred due to their unique designs. Dekcut is the disk of Poker line dedicated to Dekton big slabs cutting. Dekton increases the cutting speed of Dekton significantly, does not causes cracking and bursting, cuts carefully at a 45 ° angle, and is available with normal and silent cores..
Ø300×2.2×10 B=60/50 – Normal core
Ø360×3.0×10 B=60/50- Normal and silent core
Ø410×3.2×10 B=60/50- Normal and silent core
Ø460×3.6×10 B=60/50- Normal and silent core
Fortyfive Diamond Cutting Disc
Fortyfive is the disk developed to obtain an excellent finishing with straight and 45° cut on Neolith big slabs. It is suitable for 45° cutting on Neolith until 12 mm. of thickness. Fortyfive diamond cutting disc is suitable for: Laminam, Neolith, Kedra, Atlas Concorde, Kerlite, Techlam, Maxfine, Zero3, Ultra, Marvel XL, Porcelain tile and Geoluxe cutting.
Ø350×2,6×8 F=60/50 – Reinforced body
Ø400×2,6×8 F=60/50 – Reinforced body
Lapicut Laminam Diamond Cutting Disc
Lapicut Diamond Cutting Disc is specially designed for Lapitec surface cutting. It can be used for large Lapitec slabs that has 12,20 and 30 mm thickness.
Ø300×2,2×10 F=60/50 – Normal core
Ø360×3,0×10 F=60/50 – Normal and silent core
Ø410×3,2×10 F=60/50 – Normal and silent core
Mitercut Diamond Cutting Disc
Mitercut is the silent reinforced body disk that thanks to the special design, is the most suitable blade for 45° cutting on Ceramic big slabs. It is recommended for 45° cutting on Ceramic big slabs until 20 mm. thickness. Mitercut Diamond Cutting Disc is suitable for; Dekton, Laminam, Neolith, Techlam, Maximum, AtlasPlan, Kedra cutting.